SENTRYFLOORWORKSCall or TextCOLORADO SPRINGS — EPOXY FLOORING & CONCRETE COATINGS
Resin floors for Colorado garages, shops and commercial buildings. Most of the job happens before a drop of color goes down — which is why ours are still flat, bonded and glossy years later.
THE FINAL WIPE-DOWN
THE POUR
Nearly every failed epoxy floor failed at step one. Grinding, filling and moisture testing are the unglamorous days nobody photographs — so here they are. Scroll one floor, start to finish.
BEFORE / AFTER
A two-bay service shop — bare ground concrete to a mirror-gloss metallic river. Drag the handle.
One floor, start to finish — a two-bay service shop.
FINISH LAB
Three systems, blended to order. Every swatch here is drawn live in your browser — under your own lights the real thing has depth a screen cannot hold.
The one people stop and stare at. Metallic pigment suspended in solids resin and pulled by hand into veining — closer to poured stone than to paint, and never repeatable.
CUSTOM BLENDS AVAILABLE — EVERY POUR IS MIXED FOR YOUR SPACE
WHAT WE INSTALL
The hardest-worked slab you own: hot tires, dropped tools, and a winter of road chemical dragged in on the treads. Built to take all of it and still wipe clean.
Seamless, mirror-deep, and different in every square foot. Pigment is worked wet into veining and locked under clear — the closest a floor gets to poured stone.
Flake broadcast until the floor will not take another chip, scraped back flat, then sealed under polyaspartic that will not yellow, chalk or lift at the edges.
Basements, laundry rooms, home gyms, workshops. A gloss floor throws the light back up, and a lower level stops feeling like a lower level.
Retail, restaurants, warehouses, service bays. Systems matched to what actually gets spilled on them, installed to a schedule your other trades can plan around.
Grinding, crack and joint repair, leveling, and stripping whatever failed here last time. Every floor we install is decided in this stage.
Slabs on grade push moisture upward for years, and it is the quiet killer of a cheap coating. Where our readings say so, a dedicated barrier goes down first.
We install after close, so nothing we do sits on your critical path. Insured, warranted in writing, and priced flat across a community.
BUILT FOR COLORADO
WATER EXPANDS 9% AS IT FREEZES — ENOUGH PRESSURE TO SPLIT A SLAB FROM THE INSIDE
A Front Range slab can swing through freeze and thaw dozens of times in a season, growing and shrinking every cycle. A brittle box-store kit cracks along with it. Our topcoats flex, so the floor moves and the finish does not care.
SEALED AGAINST FUEL, BRAKE FLUID, OIL AND WINTER ROAD CHEMICAL
A tire comes home hot and sticks to a soft coating, and the finish leaves with it. A properly bonded system takes the heat, the dropped socket, and the magnesium chloride your treads carry in from January to March.
UV-STABLE POLYASPARTIC · GOES DOWN WELL BELOW FREEZING
Thin air means harder light, and a standard clear coat goes amber under it within a couple of summers. Every system we install closes with a UV-stable polyaspartic — and it cures cold, so winter is not a reason to wait.
RESIDENTIAL
Most people stop treating the garage like a garage about a week after the floor goes in. Flake, metallic or solid, sealed under polyaspartic, with a barrier underneath where the slab asks for one.
COMMERCIAL
Warehouses, retail floors, kitchens, service bays. We spec to what the floor actually takes, then install around your hours with a written cure plan so nobody has to guess when the room reopens.
FINANCING
Most projects can be spread over time through third-party lending partners, and checking what you qualify for takes a couple of minutes. Estimates are free either way — no deposit to get a number out of us.
Talk to us about financingTHIRD-PARTY LENDING PARTNERS · FREE ESTIMATES ALWAYS
STRAIGHT ANSWERS
It comes down to five things: how big the floor is, what shape the slab is in, which system you pick, whether it needs moisture mitigation, and how much old coating has to come off first. We measure before we quote, the estimate is free, and financing is available.
A standard two-car garage is usually one to two days on site. Add a day if the slab needs serious repair or an old coating has to be stripped. Commercial floors scale with square footage — you get the days in writing before we start.
Walk on it the next day. Keep vehicles off for another two to three days — the coating keeps hardening well after it stops feeling tacky, and a hot tire parked too early is the one mistake that is genuinely hard to undo.
Bare concrete is a sponge — oil, salt and spills go into it and stay there. A resin floor is one sealed surface with nowhere for any of that to soak in, so it mops instead of staining, and it takes impact that would chip the slab underneath.
Sweep it, and mop it now and then with a pH-neutral cleaner. That is the whole routine. Stay away from acids and abrasive pads — they dull the clear coat, and very little else will.
Colorado Springs and everything inside about an hour of it — Monument, Falcon, Fountain, Woodland Park, up to Castle Rock. Residential and commercial both. Further out we will still look, but the drive shows up in the price and we will say so.
FREE ESTIMATE
Tell us what the space is and what it goes through. You will get a straight recommendation — including when a cheaper system is the right call — an itemized estimate, and dates we can actually hold.
Like what you see? Evolvv Strategies can build this website for your business.
This brand and website was built by Evolvv Strategies. All Rights Reserved.
Built by Evolvv Strategies
